Unifore > Help Desk - Pioneer security equipment manufacturer > Knowledgebase

Search help:

IP camera is not stable mod. ED2381W‏


I purchased two cameras ip mod. ED2381w. 

The first one has BSP version 0160_A01_V06.18.02.01 is okay, quite stable. 

The second version has BSP V06.18.01.01  is not okay. Does not attach easily. Is not stable. Loses connection.

Almost always unattainable.

I send you screenshots of the two cameras ip. 

ip camera that does not work well, also led some do not work.



Thanks for your E-mail.

For your concerning, we herein attached the updated firmware with this E-mail, please check it.

Please note below information:

After upgrading, you need to reset to factory status.

Don't disconnect the Ethernet connection during upgrading period.


ScreenHunter_20-Aug.-16-10.51.jpg ScreenHunter_20-Aug.-16-10.51.jpg
ScreenHunter_21-Aug.-16-11.05.jpg ScreenHunter_21-Aug.-16-11.05.jpg

Was this article helpful? yes / no
Article details
Article ID: 2
Category: IP Camera
Date added: 2014-08-19 04:16:29
Views: 2374
Rating (Votes): Article rated 4.6/5.0 (44)

« Go back