Knowledgebase
Unifore > Help Desk - Pioneer security equipment manufacturer > Knowledgebase

Search help:


NVR Cannot bootup

Solution

We are your reseller in Singapore. We have a brand new 4Ch NVR that cannot boot-up and seems dead machine that without any response.
We have other 4ch/8ch NVR in stock also but don't have the bootup issue when we used the same monitor and same 48V power adaptor to test them.

Can we know how u can replace us the parts or motherboard for this new NVR that we have received only a month?

We opened the faulty NVR and see that the motherboard has red led near the on/off button switch, can u tell what is the issue?

-----------------------------------------------------

Hi there,

1. NVR firmware problem, you may update the NVR firmware.

http://www.hkvstar.com/technology-news/china-hd-network-video-recorder-nvr-troubleshooting.html

2. The NVR is defective/damaged. 

 
Was this article helpful? yes / no
Article details
Article ID: 55
Category: Knowledgebase
Date added: 2016-06-23 01:59:09
Views: 84
Rating (Votes): Article not rated yet (0)

 
« Go back