Knowledgebase
Unifore > Help Desk - Pioneer security equipment manufacturer > Knowledgebase

Search help:


D1500 WIFI OUTDOOR BULLET CAMERA

Solution

I have an existing CCTV Camera point and it is with 2 cables - a “Jack” that is 12V DC and the other is RG59.
Can I use your D1500 without the 230V AC ? That means, I will use my existing 12V DC jack to plug into your D1500. Is it possible ?

Hi there,

Thanks for your feedback.

The D1500 uses the traditional 12V DC jack which the most majority IP cameras/analog cameras use. So, I suppose the camera can use your existing cable/connector.

Sincerely,

Peter Chen
Unifore Security
Website: unifore.net


Thanks for your reply. So, that means I can just plug your D1500 into my existing 12V DC and no need to use your 230V AC adapter, right ?
Can I have a better photo of the Camera's cable ?
Once, confirmed that I can use your D1500 with my existing CCTV's point then, I will raise order for a few pieces.
Thank you.

So sorry for the late reply, I was out of town for private things on yesterday.

Yes, you can use the existing power adapter, no need to use our AC adapter.
Herein I attached the clear photo of the cable.

Sincerely,

Peter Chen
Unifore Security
Website: unifore.net

 
Was this article helpful? yes / no
Article details
Article ID: 81
Category: IP Camera
Date added: 2017-07-19 09:13:31
Views: 37
Rating (Votes): Article rated 3.7/5.0 (3)

 
« Go back