Knowledgebase
Unifore > Help Desk - Pioneer security equipment manufacturer > Knowledgebase

Search help:


Outdoorsiren can not connect with g60

Solution

I have test 2 outdoorsiren to connect with a g60 alarm system but connected not what can i do

Hi there,

Thanks for your feedback.

The programming method is here:
https://www.youtube.com/watch?v=WaPW5v9c5yA&index=6&list=PLBoxA2apyIvdYq_C4g8O1L6o3Kpi94Twc

Method:
When siren is ready to program, triggering the alarm panel by pressing emergency button on the panel's keypad.

After the programming, you may go to [Tone Setting] to turn on [Arm/Disarm Beep].

By the way, if you are using the solar powered siren, you may recharge the siren by putting it outside or using the USB cable to connect with a computer or cellphone charger.

Sincerely,

Peter Chen
Unifore Security
Website: unifore.net

 
Was this article helpful? yes / no
Article details
Article ID: 94
Category: Alarm System
Date added: 2017-07-20 02:11:00
Views: 39
Rating (Votes): Article rated 5.0/5.0 (1)

 
« Go back