Knowledgebase
Unifore > Help Desk - Pioneer security equipment manufacturer > Knowledgebase

Search help:


» Category: Alarm System  (Go back)

» Articles in this category:

 
How to update the firmware of alarm system? Article rated 4.5/5.0
Thanks for purchasing our security alarm system. We are pleased to provide this simple tutorial for teaching you how to update the firmware for our home alarm system. Download the guide: http://suppo...
False alarm for wireless PIR motion sensor Article rated 4.9/5.0
Dear Techsupport,  We have an issue at one of our clients. They have connected 5 PIR sensors throughout the house and received 4 x false alarm in 2 weeks time.  We have checked the...
Question about GSM-800 keypad wiring‏ Article rated 4.5/5.0
 I have a few questions regarding gsm 800 alarm system and wireless keypad: 1. Can I connect 220 V AC power to the transformer in the metal case? I  live in USA. The transformer does no...
How to use smart sensor (zone) for alarm panel? Article rated 4.6/5.0
Two more question regarding smart door sensor and the G70-F. 1.  Can this alarm central program the smart sensor into a "smart zone"...  How? I thought the central would not arm, if one ...
Alarm communication - VHF/UHF central monitoring station Article rated 4.8/5.0
Good day,We have bought some of your GSM/PSTN alarm systems and have installed them in client locations. We have a radio based alarm system and receiver station in our monitoring station. Is it possib...
Wireless sensor programming failed VS-WH500 Article rated 3.7/5.0
I wrote to you is because the programming of these sensors fails or not work absolutely. On the case of  wireless water leak sensors and on the datasheet of VS-WH500 is clearly wrote that the cod...
Two false alarm detection per a day Article rated 1.0/5.0
We are testing now YH800 motion sensor. We have 2 false detection pera day. Why is it appeared? --------------------------------------------------------------------------------------------------...
No DIP switch on wireless door/window sensors Article rated 4.0/5.0
Is it possible to change the RF code of the VS-PWMC so that I am able to use multiple devices on the one alarm zone?  Or is it limited to one device for each zone? Other magnetic contacts I ...
Reset GSM-800 commercial alarm system Article rated 4.3/5.0
1-How reset factory default alarm?2- When I want to activate the alarm, with the button away, the alarm beeps as the next DI DI DI DI DI DI DI DI DI DI  (x10) and activate the alarm does not stop...
SPS 260 Wireless siren can't work with G60-Ultimate Article rated 4.9/5.0
I have bought a Miguard SPS 260 Wireless siren hoping it will work with my new G60 Ultimate, but I am having trouble pairing the two items. It has a learn button on the siren.  It beeps once...
G60-Ultimate alarm can't work with 433MHz PT2262 sensors Article rated 4.9/5.0
I'm testing now the sample kit of G60 alarm system from Unifore. Have few short tehnical questions:Cannot program additional 433mhz fix code (PT2262)sensors (PIR, smoke detectors, keyfobs) to G60. Tha...
Thermostat function on G60 Ultimate Alarm System‏ Article rated 3.7/5.0
Hello,I am trying to understand how the thermostat function works on this Alarm system.   How does the alarm system communicate with the furnace?   I do not see any hardwire connec...
How to make Wireless audio&video PIR camera work with G60-Ultiamte Article rated 4.8/5.0
Hi! Most of our clients have bought our G60-Pro or G60-Pro and VS-DVR. In fact, the difference between G60-Ultimate and G60-Ultimate is that the G60-Pro includes one wireless audio&video PIR camer...
Alarm panel text messaging not working Article not rated yet
> I was instructed by Swallow to email you regarding my Unifore G-60 > Ultimate Alarm Panel that is no longer working correctly. > > I purchased it on December 29, 2014. It has been workin...
keyboard VS-WJP1 Article rated 5.0/5.0
I got a VS-WJP1 keyboard and install the batteries, the keyboard does not react. I put new batteries and does not react, it is impossible to program the keyboard on the alarm panel G60 Ultimate. The k...
Wired Beam Fence Article rated 5.0/5.0
As you know, we bought alarm system as a sample (See invoiced attached), and we on Marketing and Feasibility Study, now we faced a problem connecting Wired Beam Fence (VS-R0240-L) to Alarm System , al...
Connect wired siren to G60 Article not rated yet
Hi Peter, I want to connect the VS-YSGJH-A siren to the G60 alarmpanel, i have read the article on your website but did not succeed: On the siren side i have the following connections: Power + and P...
Diamond Alarm Article rated 5.0/5.0
I have a few questions: The Diamond Alarm is not boosting the signal. I have 2 Diamonds 1 meter next to each other with a line of side. 1 i have programmed, but the other is not repeating the first on...
Wireless Sirenes Article not rated yet
Dear Peter, Hope all is well. We have just received our new order with the new wired outdoor siren included. This is the first time we bought a hard wired siren. Could you give us some tips how to ...
Does G60 still alarm after dis-arm Article rated 5.0/5.0
hi all, I have a question related to G60 Ultimate feature. we will install wired sensors in G60 Ultimate and we will have some situations happen as below: 1. You battery does not supply enough power ...
G60 ultimate no entry delay with app Article not rated yet
Hi, For the G60-ultimate alarm system, when the alarm is armed using the IOS application (by SMS code), entry delay is no available, the alarm start when the door is opened.When the alarm is armed usi...
which zones numbers can I program the si Article not rated yet
Hi, I hold on to program allarm and want to know which zones numbers can I program the sirenHi there, The siren doesn't need to program into zones. Quite the contrary, you need to program the alarm p...
Infrared Beams Article rated 5.0/5.0
Good morning, I wish to replace my existing pool alarm IR Beams. I use 4 pairs of beams, 1 high and 1 low on each column, protecting 2 sides of the pool (only two needed). I also saw your multi bea...
Solar powered multibeam VS-t10 Article rated 5.0/5.0
Dear Reader, Conerning Wireless solar 4 beams fence sensor Model: VS-T10 Has the solar beam two or only one indicator per beam ? Do you have a more detailed description ? What does it mean ? Short pr...
Outdoorsiren can not connect with g60 Article rated 5.0/5.0
I have test 2 outdoorsiren to connect with a g60 alarm system but connected not what can i doHi there, Thanks for your feedback. The programming method is here: https://www.youtube.com/watch?v=WaPW5...
Home Alarm System Article not rated yet
my G70 ultimate system is not sensitive enough. it is not detecting wireless sensors in the next room. worked only few days. need some help.Hello dharmasiri kothalawala, The wireless transmission ran...